Medium Bull Block Machine

In our wide range of products, we provide excellent quality Medium Bull Block Machine. Offered product is highly accepted by clients for various industry applications due to its features like robust construction, excellent performance and accurate dimensions. We also offer customization solution for this machine as per the requirements of the client and can be availed at the most affordable price from us.

Global features of construction:

• Close grain cast iron made main body with base
• Built with space walls and ribs for proper alignment and rigidity
• Drawings block constructed in specially graded casting
• Hard metalized and ground at wire line to increase abrasion resistance
• Phosphorus Bronze gear and high carbon steel worm immersed in oil bath reservoir in the machine body to absorb its heat of action
• Heavy duty ball and roller bearing fittings for shafts and worm with the provision for oil seals
• Water cooled Die and Block
• Water circulation arrangements for cooling the drum
• Intensive water cooling arrangements for die box

Operation Manual:

• Wire rod is pointed in the pointing machine and inserted through the die positioned in the Die Box
• 1st wire drawing machine should be passed through mechanical De-Scaling (in case of M.S. Wires).
• End of wire is fastened to a locking device attached to the drum which is rated by push bottom starter
• Then again wire fastened to the block gets pulled and coiled around the drum
• When wire gets pulled through the die having higher inlet dia and lower outlet die
• Diameter of drawn wire gets reduced
• Starting end of the drawn wire released from lock of 1st drum
• 1st drum is passed through overhead loops
• Continuous pulley on the drum brought down and inserted through the die of 2nd drum and drawn through die for further reduction
• Thus, there is a continuous operation of the wire through the entire wire drawing drum in a set to get the required finished diameter of wire
• Machine is stopped to unload finished materials when the drum of last wire drawing machine in the set gets fully loaded with the drawn wire
• The machine is stopped after finishing one bundle of raw materials and then the end is welded to another end of a fresh bundle
• In case of accidental snapping of wire, the snapped ends are welded by welding machine for continuous processing